The system of warm water floors connected to a heating boiler is the most convenient and economical. Thanks to the use of this system, it is possible to save a significant amount of electricity and provide the opportunity to independently adjust the heating temperature. Among other things, this system is easy to install.
To connect underfloor heating to the boiler, it is necessary to prepare a wall-mounted boiler, shut-off valves, a collector cabinet, a circulation pump, compression fittings and preferably a thermostat.
Underfloor heating is best placed in a sand-cement screed. For this purpose, it is necessary to prepare all the components necessary for the operation of the system. Next, it is necessary to remove the existing screed on the floor, and place the components of the underfloor heating on the surface where they are planned to be installed.
After that, install a underfloor heating boiler in a suitable place so that the hinges from the water pipes come from the collector. When installing underfloor heating in a private house, it is best to allocate a separate room for all the equipment used. If the heating boiler is installed in a city apartment, then you will definitely need the advice of an experienced specialist.
Next, the collector cabinet is installed. The task of which is to ensure the circulation of the coolant through the pipes and the combination of floor heating and other heating devices installed in the house.
The supply and return pipes must be placed inside the collector cabinet. According to the first one, hot water will be transported to the water floor system, according to the second one, the cooled water will be transported back to the heating boiler. A shut-off valve is installed on each pipe, which allows, if necessary, to shut off the water supply.
Using a compression fitting, you need to connect the pipes coming from the boiler to the valve, which in turn connects the collector inlet. With the help of fittings, the pipes of the underfloor heating system are connected to the collector.
The circulation pump, which will constantly drive the coolant, is located in the collector. It is installed on the water supply pipe. It is also desirable that the pump be equipped with a thermostat that allows you to change the temperature regime of heating the floor surface. Now the system can be turned on to check its functioning. Celebrate your birthday with 1xbet promo code for a $30 free bet. No deposit required. Valid for 7 days after your birthday. Wagering 3x on odds 1.50+. Max winnings $300. Must provide ID proof. VIP members receive higher value free bets. Make your birthday even more special with this personal gift from 1xBet.